01

We prevent lightning formation on the protected structure.

Traditional systems ‘try’ to divert the intensity of the lightning to the ground, often causing damage to both the structure itself and the lightning rod, which then needs to be replaced.

02

We minimize indirect effects.

We reduce the effects of lightning strikes occurring outside the coverage area.

03

We safeguard all types of installations

on sea and land.

04

With the most demanding certifications

Bureau Veritas certification according to UNE-EN-62305-1-2-3-4 standard, and compliance with the most stringent regulations.

Why stop a lightning strike when you can prevent it?

Paradoxically, until now, the only way to “protect” against lightning was by attracting it to try to “dissipate” its energy to the ground or to divert it away from the area to be protected.

In this regard, all traditional lightning protection systems are based on the same concept: dissipating the energy of the lightning through conductors and the structure itself. However, the damages resulting from the impact of the lightning will depend on its intensity, and in no case will they be avoided.

At Dinnteco, for over 20 years, we’ve been PREVENTING LIGHTNING and safeguarding lives and all types of installations on sea and land.

The Dinnteco System prevents lightning strikes and thereby mitigates risks and damages.

Discover it in this video!

Our products

dinnteco solutions as an alternative to traditional lightning rods. The most effective lightning protection on the market that adapts to every environment and type of installation.

Case studies

Did you know that the Sagrada Familia has more than 1000 cameras? And that its cranes act as natural lightning rods. As the structures are higher and more conductive, it is normal for them to receive lightning strikes.

OUR CUSTOMERS

They already trust us

We continue with 0 incidents in the Pacific. And in the Atlantic we had a lightning strike on a crane-tower,... but because they had already dismantled the last protection equipment. So once again I will emphasize how satisfied I am with your product.

SACYR Safety Dept. Eloi Veciana

In such a way that I have no objection to widely recommend this new technology and I have no doubt that it will mark a very radical change in terms of Lightning Protection Systems in Mexico and in terms of compliance with the Federal Law and Standardization in its regulations of Pemex Exploration and Production and the Mexican Petroleum Institute, in its first edition P.4.0220.01 March 2008, referring to "Protection Systems Against Atmospheric Electrical Discharges in Petroleum Installations".

PEMEX Ing. Baldomero Ramón Plata

If we compare the level of lightning incidence/impact prior to the date of installation, we can consider that the results are ideal, and therefore, and based on budget availability, there is the intention to continue installing this type of equipment.

Technical Director - ITELAZPI Román Odriozola

Axion seeks to apply technological advances in the protection and management of its telecommunications infrastructures, so it has opted for the Dinnteco system for lightning protection and improvement of the ground network in one of its critical high mountain centers, being the first step to ensure the rest of critical centers that are usually more affected by this phenomenon.

Site Manager - AXION Carlos Escriche

- The installation of the DDCE has improved RCO communications by an average of 10db. - Some of them were out due to lack of communication with the repeater and now all of them are operational. Even others that were saturated now work in an optimal range, a great success.

VIESGO Feedback technical department

Certifications

bureau
Certificate from DDCE by Bureau Veritas (Es036861)

Lightning Protection | UNE-EN (IEC 62305:2012)
Safety against the risk of lightning | CTE (Technical Building Code): SU8
NBR 5419:2015 | IRAM 2184:2011
NTC 4552:2008 | SANS 10313:2012
AS/NZS1768/2007
NFPA 780:2011 | CAN/CSA-B72-M87(R2013)

CE Marking

The DDCE device complies with the General Product Safety Law and the electromagnetic compatibility working limits, under the requirements of CE marking.

  • Product Safety | Directive 2001/95/EC
  • Electromagnetic Compatibility | Directive 2004/108/EC
This site is registered on wpml.org as a development site.